Jump to content
Sign in to follow this  
edison_GTI

FS: 15x9 4x100 Wheels and Maxxis RC1 Tires - Fits Miata

Recommended Posts

In case you haven't realized, these wheels are the same size and fitment as NA and NB Miatas.

 

5b245d44ea4fa_20180615_182233.jpg

Share this post


Link to post

I can split wheels and tires in case you want either one.

 

Just the set of brand new RC1s? $600

 

Price adjusted for the Maxxis current sale.

Share this post


Link to post

how much for 4 c3m wheels/ no tires?

Share this post


Link to post

how much for 4 c3m wheels/ no tires?

 

Two options: 

 

  • Set with minor cosmetic flaws - $320
  • Set with some surface scratches - $280

Both sets include aluminum 949 stem valves. 

Share this post


Link to post

Did you have to run spacers on Kermit for these? I'm considering getting a pair with 245s for the front of my car, I'll need 15mm spacers so I was curious if you happen to have some.

 

I'd buy a whole set, but I think 8" is all I can fit in the rear without major trimming and flares. I'd also need to find a way to get them to Austin.

Share this post


Link to post

I ran 15mm spaces all around and I do have two pairs of H&R spacers I can sell.

 

Do you want a pair of wheels with 245s and 15mm spacers?

Share this post


Link to post
  1. (2) - Black TRMotorsports C3M and Maxis RC1 245/40-15 mounted - Year old wheels with cosmetic scratches, and tires have 6 heat cycles - Wheels include 949 valve stems - $350 $280 for the pair
  2. (2) - Black TRMotorsports C3M and Maxxis RC1 225/45-15 mounted - Year old wheels with cosmetic scratches, and tires have 6 heat cycles with minor flat spotting from wheel lifting - Wheels include 949 valve stems - $240 $200 for the pair

I may just see if I can make the rears work. If not I can run them in the front till my existing 205/50/15 RC1 wear out.

 

How much for the above with all 4 H&R spacers?

 

Happen to know anyone heading to Austin for any events that could tote them here? I could pay in beer/whiskey or gas money if they are into that sort of thing.

Share this post


Link to post

How about $560 for the four wheel/ tires and four spacers? I'll throw in a fifth spare spacer I have.

 

FYI, the spacers are VW/BMW hub centric (57.1 mm).

 

I'll take pictures of the wheel/ tires.

 

We should be able to work something out, I bet we can find a TJ headed to Austin from Houston. We could also meet half way.

Share this post


Link to post

Ahh I knew I wasn’t thinking about something. Honda’s have a 56.1mm hub so those won’t work.

 

 

Lets do the wheels/tires only then. If you could send some pics so I can see what I’m getting that would work. Thanks!

Share this post


Link to post

Ahh I knew I wasn’t thinking about something. Honda’s have a 56.1mm hub so those won’t work.

Lets do the wheels/tires only then. If you could send some pics so I can see what I’m getting that would work. Thanks!

PM sent with pictures.

Share this post


Link to post

What springs and shocks are you looking for for your nc?

Share this post


Link to post

What springs and shocks are you looking for for your nc?

Re-valved Ohlins with 800/500 springs.

 

Are you still looking for the set of wheels without tires?

Share this post


Link to post

Good choice . I have some Koni sports and springs for sale for an entry level project . 

as far as the whels go, I ordered new ones . Thanks

Share this post


Link to post

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  

×
×
  • Create New...