Jump to content

Welcome to TrackJunkies.Org
Register now to gain access to all of our features. Once registered and logged in, you will be able to create topics, post replies to existing threads, give reputation to your fellow members, get your own private messenger, post status updates, manage your profile and so much more. If you already have an account, login here - otherwise create an account for free today!

RACE READY 1997 Mazda Miata Track Car (WRL/ChumpCar)

  • You cannot start a new topic
  • Please log in to reply
No replies to this topic

RichW Blk and White Miata

RichW Blk and White Miata

    Track Denial

  • Junkies
  • Pip
  • 2 posts
  • LocationAustin, Tx

Race Ready WRL (World Racing League) car for $3,500

Also, incredibly safe and inexpensive track car (full cage)

LOCATION: College Station, TX


Had fun at a few track days and want to go racing or want a dedicated track car with the cheapest possible disposables?  Racing is an adrenalin rush like no other!  FEED THE NEED!  This car is a competitive WRL car and you can’t get much more reliable than a Miata.  This car has been raced twice and is rock solid.  In two endurance races, the only issue was a axle bearing started going bad at the of the race.  $3,500 is our bottom line price, so don’t bother contacting us if that is not a fit for you.


●      Full Roll Cage certified by World Racing League and ChumpCar with NASCAR style side protection for extra safety.  This thing can take a monstrous impact on all sides including a T-bone in the door and still be safe

●      Pro 2000 Competition Racing Seat

●      Ultra Shield Harnesses both sides

●      Special Upgrade - Modified for both TALL and short drivers.  The back of the seat rails have been lowered 2 ½ “ BELOW THE FLOOR but the front of the rails are still at stock height.  The floor pad was modified for this.  The race seat is fully adjustable for rapid driver changes for different drivers with legal impact protection in the rear of the seat that also adjusts.  As a taller driver pushes the seat back for longer legs, the seat also goes lower for more head clearance.  Fits a driver up to 6’ 3” with helmet, depending on torso length.  The result is a more comfortable slightly laid back seating position in the race seat.  Great for 2 hour shifts in endurance racing.

●      Cage built for passenger seat for training/coaching

●      Team Dynamics Wheels

●      1.8L

●      5 Speed (6 speed sucks for the track)

●      Replaced:

○      Water pump

○      Timing belt

○      Coil packs

○      Valve Cover gasket

○      Motor mounts

○      Control arms

○      Wheel bearings (all 4 wheels for low friction, Genuine Mazda)

○      Carbotech brake pads with 2 HDPE days on them

○      Falken Azenis tires with 2 HDPE days on them (legal for WRL and Chump and very sticky)

○      Wiper blades

○      New Windshield (crystal clear)

○      Front Main seal

○      Brake fluid flush

○      Tranny fluid change

○      Diff Fluid change

○      Fresh oil change with 2 HDPE days on it

○      Full “real” gauges

○      Race mirror

○      Pit clock with night light


●      LOCATION - College Station, TX

●      Contact:  “Jeff”,  teabonejle@gmail.com



Additional photos can be found here after making the obvious replacements in the link:


Attached Thumbnails

  • IMG_20170225_144211502-small.jpg

2001 Viper RT10=>2002 Z06=>2002 Lingenfelter Z06=>99 Turbo Miata (Black w/ White hardtop "Little Cop Car")