Jump to content


  • Content Count

  • Joined

  • Last visited

  • Days Won


About ht_geordie

  • Rank
  • Birthday 05/01/1969

Profile Information

  • Gender
  • Location
  • Track Vehicle
    95 Integra

Recent Profile Visitors

6235 profile views
  1. Yes, awesome ‘Stang in fantastic color. I do like me a blue car!!
  2. Thanks. They are still up for sale at the moment.
  3. Bumping this back up the list. Great addition for your Carrera to get additional camber up front.
  4. Bump. Still available. Great for moving race car short distances. It stands up vertical so takes up much less space when storing.
  5. Bump! Where are all the P-Car guys?
  6. I bought these for a 997-C2S that I owned many moons ago. Never installed them...
  7. PM me and let's talk. I've got a few guys from M3Forum interested.
  8. I need to sell my 2005 M3. Car has been looked after very well. I have all documentation and receipts since new. I am the third owner. It is a competition pack car in the (relatively) rare interlagos blue. Here are the details: 67668 miles (as of writing) Virtually new Michelin Pilot Super Sport tires on the ZCP rims 245 front and 255 rear New clutch and refreshed transmission wear items New transmission mounts and flex joint New engine mounts Completely refreshed cooling system (Texas heat!!) Standard Parts: E46 2005 M3 with Competition Package Interlagos blue Black interior Competition Package Cold Weather Package Premium Package Adjustable Seat Width / Lumber Parking Distance Control Xenon Headlights Navigation Harmon Kardon SMG Modifications (in date order): Car has Lo Jack fitted. aFe Magnum Force Intake Kit ($410) Epic Motorsports Software (incl. Calibration Interface) ($700) Rogue Engineering Diablo Exhaust, X-Pipe, Rasp Pipe ($2,400) Performance Friction Front Brake Upgrade (stainless steel braided hoses and solid caliper guides included) ($1,250) Performance Friction Direct Drive Rotors and pads for rear ($960) Bimmerworld Extended Lugs & Nuts ($190) RTAB Limiters (bushings replaced with OEM at same time 6/17/15) ($27.50) Vorshlag rear axle carrier reinforcement plates ($1,375 including labor) MCS 2-way adjustable non-remote dampers ($3,450) Rogue Engineering articulating rear ride height adjusters ($260) Vorshlag nylon rear spring locators ($75) Whiteline sway bar link assemblies heavy duty ($150) Hyperco coil over springs F550lbs R650lbs ($162) Vorshlag camber/caster plates ($439) Vorshlag rear spherical shock mounts ($199) Vorshlag rear upper shock mount reinforcement plates ($29) Spares: Brake pads PFC 08 compound. (3) Mahle oil filters (9) qts Castrol TWS 10w60 (2) Aluminum jack pad adapters Service manual ($99) Schwaben Professional Service tool ($180) INPA software on CD and several cables (I modified one to make it work) Wheels – Apex Arc-8 18x9.5 et35 Hyper Black ($1,200) Schroth Quick Fit Pro 4-point Harness ($380) VAC Motorsports Seat Mount Base, side mounts and slider ($400) VAC Motorsports Anti-sub bracket (6-pt harness mount)($40) VAC Motorsports seat belt adapter ($110) VAC Motorsports lap belt adapter ($40) Sparco Evo-II USA seat (out of date)($800) OEM suspension parts removed Original radiator OEM air intake Notes: Car interior is in very good condition other than the following A and C pillar fabric is coming off on both sides. These either need to be replaced (around $80 each) or repaired. This was going to be a task for this year but I don’t have time to complete. Steering wheel alcantara/suede is quite messy. You can get the wheel recovered professionally for around $250. The rear-view mirror suffered the dreaded liquid failure, so I stripped and reassembled. So no auto dimming. The rest of the interior is very good. Some wear and tear as expected for age, but the front seats are extremely good, near perfect leather. No tears or obvious marks in driver seat leather. The exterior is good. Some stone chips on the front. A few dings around the body work. The kind of marks that only the owner will know about or see when hand washing the car. Again, not concours but good for age. The VANOS was changed at 42,000 miles (2012) due to failure. The work was carried out by Motorwerks BMW under warranty from BMW of North America. I have had no issues with VANOS during my ownership. The engine is great. Doesn’t burn oil at all, even during the couple of times I have had the car on track. I purchased the car with 61,100 miles on the clock in Feb 2016. At 62,789 miles (7/26/16) I took the car to a local BMW specialist as the clutch engagement was “slurring”. Chased the issue for a couple of weeks and eventually resorted to pulling the transmission down to look at the clutch. Clutch was fine by there was an oil leak from the rear main engine seal. Took the opportunity to change out some of the typical wear items on the transmission (lock pin, pilot bearing, clutch pivot pin, clutch release arm, input shaft seal, detent ball & spring, release arm spring). Also put in new transmission mounts and driveshaft flex joint. Total cost $5,200. In August 2016 I had the sub frame reinforcement done at Vorshlag Motorsports in Plano, TX. At the same time I had them install the MCS 2-way NR suspension. There were no cracks. You can see pictures of the whole work process at Vorshlag’s website. On re-installation of the axel carrier sub-frame I had Powerflex urethane bushing installed. The MCS suspension is absolutely AWESOME. The setup is street/track balanced. 550lb front springs and 650lb rears. The MCS dampers have such a great digressive valving that the ride is less harsh and jouncy than the OEM. In June 2017 (6/14/17 and 65,115) I had the entire cooling system refreshed. I’m not going to list all the parts here because it is a LONG list but the major items were; expansion tank, all hosing, radiator, belts, tensioner and radiator. Over $2,000 of parts. Also replaced the engine mounts at the same time and did the differential fluid. It’s been 2,500 miles since last oil change. It is due one by time, but I do have the filter/oil for the change. I have not driven the car for a few months now. Battery is maintained with a trickle charger. KBB for this car is $19,800 top end. I don’t think that KBB values specialist cars like this one very accurately, tending to be low. That said, I have used this as the basis for my valuation and adjusted for the extras that I am offering. Please note that this car has aftermarket parts installed that have altered the factory NVH. The Vorshlag front camber plates and rear damper mounts are spherical bearings. The rear axel carrier bushings are hard urethane. This had improved the performance of the car in terms of drive and handling but definitely has increase substantially the NVH. If you think you won’t like this, then this is NOT the car for you. It is a perfect weekend fun car and occasional track weapon and comes with EVERYTHING that you need to do that. Mount in a race seat, install the track wheels and go have a blast on track. The MCS suspension is amazing. Price: Car as is with all the spares mentioned $26,750 Car as is without the spares (still supply you the service manual/INPA software, filters and oil, OEM suspension parts and radiator) $24,950 I’m open to sensible offers…
  9. When I bought these, I spoke with the sales guy directly rather than risk just ordering off the website. I purchased these for 2006 Carrera S. It is the full kit with everything that you need. If you don't have HID headlights just don't use the supplied bracket, use the additional shims that are there. I got the 10mm shims to give a preset additional 1deg or so of camber as you state.
  10. For 997/987, Brand new never been installed. Factory rubber bushings. For cars with litronics (bi-xenon / HID headlights) Additional shims: (2) 10mm shims & (2) 1mm shims. Adapter spacers for GT3 conversion This is the full kit, all you need to do the conversion, as advised by Tarett sales person. This lot retails for $1,365 plus shipping (and possibly tax) Yours for the low price of $1,000
  • Create New...